• Water Repellent Hydrofuge
1 2

Orsol

Water Repellent Hydrofuge

Water Repellent Hydrofuge

Price per m²

€14,15 EUR
€14,15 EUR
Sale Sold out
Shipping calculated at checkout.

Tax not included

Grootte
Kleur

Dimentions

/

Packs per m²

Weight

HYDRO

Surface preparation:
Clean, dust-free, degreased, and dry surface. If efflorescence (white spots) is present, clean it with a detergent. Do not use acid-based products.

Application:
Use undiluted.
Shake the product vigorously before use (5 minutes).
Temperature of the substrate between 10 and 30 °C – Do not apply in rain or high temperatures.
Spray application (HVLP):
Protect the environment.
Apply from bottom to top in 2 layers – DO NOT OVERAPPLY
Drying time between each layer: approximately 15 minutes
Application with a brush or roller:
Protect the environment.
Apply from bottom to top in 2 layers with a brush – DO NOT OVERCOAT – In case of brush marks, homogenize with a short-haired roller
Drying time between each pass: approximately 30 minutes
Protects and dries in 24 hours – optimal performance after one week
Clean equipment immediately after use with water.


Storage: dry place between 5°C and 30°C – use within two months.

Consumption: 6 – 10 m²/l for both layers and depending on the substrate.

Safety: Wear latex gloves.
When using a sprayer, wear safety goggles and a mask – skin protection.

Do not mix with other products.

KEEP OUT OF REACH OF CHILDREN.
Do not swallow. In case of emergency: ORFILA number: 01.45.42.59.59

Version 18/04/2013

View full details

Consumption of installation products

The table below provides information on the average consumption of installation products required for stone strips. Please note that this information pertains specifically to stone strips and does not include stone strip corner stones. For details on the consumption of installation products related to corner stones, please visit the corner stone product page. Proper estimation of these products is essential to ensure a successful installation.

Average consumption of installation products for their stone strips Tile adhesive: Orflex Souple/ High Performance (bag 25kg) Double adhesive application Wall joint mortar (25kg bag) Colorless water repellent HYDRO (1 can = 1 liter) Tinted water HYDRONOIR repellent for collection Statur (1 can = 1 liter)
Cubik - Gaïa - Manitoba - Olympe - Portland - Rocky Mountain - Tahoe - Tertus - Yosemite ± 3m² - ± 10m² -
Statur ± 3m² - - ± 7m²
Grand Canyon ± 3m² ± 4m² ± 10m² -
Brick - Briquette - Causse - Manoir - Meulière - Mixto ± 4m² ± 4m² ± 10m² -
Brécy ± 4m² ± 10m² ± 10m² -
Galéo ± 4m² ± 2m² ± 10m² -

Please ensure that you accurately estimate and use the recommended quantities of tile adhesive, wall joint mortar, and water repellent to achieve the best results during your stone strip installation project. By following the recommended quantities, you'll be eligible for an additional 10 years of warranty on your installation.

To apply for this extended warranty, please contact us directly.